F62FJ
48 N·s · 57 N avgAeroTech RMS · class F · Black Max · delay 4, 6, 8, 10 s · built for the RMS-24/60 case
95 mm long · 88 g loaded · 32 g propellant
Muster is a shopping aid, not an assembly guide. Build only to the reload's printed instructions — always the authority — and confirm every part with the manufacturer before you buy or fly.
What you need to fly it
The simplest build — in its own RMS-24/60 case. Reusable hardware you buy once, plus the single-use reload.
Reusable hardware to own
- RMS-24/60 case
24 mm reusable motor case
Source: apogeerockets.com
- 24 mm forward closure
Reusable; shared across every case length in this diameter
Source: apogeerockets.com
- 24 mm aft closure
Reusable; holds the reload's single-use nozzle
Source: apogeerockets.com
Single-use reload to buy
Single-use: grains, liner, nozzle, o-rings, delay element, igniter, and ejection charge
Source: thrustcurve.org
- A dab of high-temperature o-ring grease is needed on assembly (it comes with most hardware sets).
Cases that fly it
Its own case is the simplest; a longer case flies it too, with the adapter and spacers.