G33
98 N·s · 30 N avgAeroTech RMS · class G · — · delay 5, 7 s · built for the RMS-29/40-120 case
124 mm long · 72 g propellant
Muster is a shopping aid, not an assembly guide. Build only to the reload's printed instructions — always the authority — and confirm every part with the manufacturer before you buy or fly.
What you need to fly it
The simplest build — in its own RMS-29/40-120 case. Reusable hardware you buy once, plus the single-use reload.
Reusable hardware to own
- RMS-29/40-120 case60006
29 mm reusable motor case
Source: apogeerockets.com
- 29 mm forward closure29FCC
Reusable; shared across every case length in this diameter
Source: aerotech-rocketry.com
- 29 mm aft closure29AC2
Reusable; holds the reload's single-use nozzle
Source: aerotech-rocketry.com
Single-use reload to buy
Single-use: grains, liner, nozzle, o-rings, delay element, igniter, and ejection charge
Source: thrustcurve.org
- This reload is out of production. That is not the same as decertified — it stays flyable until stocks run out — but it may be hard to find.
- A dab of high-temperature o-ring grease is needed on assembly (it comes with most hardware sets).
Cases that fly it
Its own case is the simplest; a longer case flies it too, with the adapter and spacers.