I1299N
423 N·s · 1335 N avgAeroTech RMS · class I · Warp 9 · delay Plugged (no ejection charge) · built for the RMS-38/480 case
249 mm long · 422 g loaded · 192 g propellant
Muster is a shopping aid, not an assembly guide. Build only to the reload's printed instructions — always the authority — and confirm every part with the manufacturer before you buy or fly.
What you need to fly it
The simplest build — in its own RMS-38/480 case. Reusable hardware you buy once, plus the single-use reload.
Reusable hardware to own
- RMS-38/480 case3848C
38 mm reusable motor case
Source: aerotech-rocketry.com
- 38 mm forward closure38FCC
Reusable; shared across every case length in this diameter
Source: aerotech-rocketry.com
- 38 mm aft closure38AC2
Reusable; holds the reload's single-use nozzle
Source: aerotech-rocketry.com
- 38 mm forward seal disc38FSDSS
Reusable forward seal disc
Sources: aerotech-rocketry.com, apogeerockets.com, buyrocketmotors.com
Single-use reload to buy
Single-use: grains, liner, nozzle, o-rings, delay element, igniter (no ejection charge)
Source: thrustcurve.org
- This reload is plugged — it carries no ejection charge and must be flown with electronic deployment (a timer or altimeter) and a plugged forward closure.
- A dab of high-temperature o-ring grease is needed on assembly (it comes with most hardware sets).
Cases that fly it
Its own case is the simplest; a longer case flies it too, with the adapter and spacers.