6827M2080-P
6827 N·s · 2082 N avgCesaroni Pro · class M · Skidmark · delay Plugged (no ejection charge) · built for the Pro75-6GXL case
1025 mm long · 7.04 kg loaded · 4.11 kg propellant
Muster is a shopping aid, not an assembly guide. Build only to the reload's printed instructions — always the authority — and confirm every part with the manufacturer before you buy or fly.
What you need to fly it
The simplest build — in its own Pro75-6GXL case. Reusable hardware you buy once, plus the single-use reload.
Reusable hardware to own
- Pro75-6GXL case
75 mm reusable motor case
Sources: thrustcurve.org, apogeerockets.com
- 75 mm Pro forward closureP75-FC
Reusable; shared across every case length in this diameter
Source: apogeerockets.com
- 75 mm Pro rear closureP75-NH
Reusable; holds the reload's single-use nozzle
Sources: apogeerockets.com, pro38.com
Single-use reload to buy
Single-use cartridge: preassembled grains, liner, nozzle, and forward closure — loads as one piece (no ejection charge)
Source: thrustcurve.org
- This reload is plugged — it carries no ejection charge and must be flown with electronic deployment (a timer or altimeter) and a plugged forward closure.
- Sparky (metal-loaded) propellant: many ranges restrict these for fire risk. Check your field's rules before flying.
- A little high-temperature grease on the closure threads and o-rings helps on assembly.
Cases that fly it
Its own case is the simplest; a longer case flies it too, with the adapter and spacers.