I426LB
505 N·s · 426 N avgLoki Research · class I · Loki Blue · delay Plugged (no ejection charge) · built for the 38/480 case
307 mm long · 553 g loaded · 234 g propellant
Muster is a shopping aid, not an assembly guide. Build only to the reload's printed instructions — always the authority — and confirm every part with the manufacturer before you buy or fly.
What you need to fly it
The simplest build — in its own 38/480 case. Reusable hardware you buy once, plus the single-use reload.
Reusable hardware to own
- 38/480 case
38 mm reusable motor case
Sources: thrustcurve.org, lokiresearch.com
- 38 mm forward bulkhead
Reusable; shared across every case length in this diameter
Source: lokiresearch.com
- 38 mm graphite nozzle
Reusable graphite nozzle — fit the throat size your reload's instructions specify
Source: lokiresearch.com
Single-use reload to buy
Single-use: liner, propellant grains, o-rings, and the delay or smoke element (the nozzle and closures are reusable, not in the reload) (no ejection charge)
Source: thrustcurve.org
- This reload is plugged — it carries no ejection charge and must be flown with electronic deployment (a timer or altimeter) and a plugged forward closure.
- Loki's graphite nozzle is reusable and sold by throat number — the correct throat for this reload is in its instructions, and the wrong one can cause a failure.
- A dab of high-temperature o-ring grease is needed on assembly (it comes with most hardware sets).
Cases that fly it
Its own case is the simplest; a longer case flies it too, with the adapter and spacers.